So I’m hunting last Sunday with my cousin, and we happen upon a pond where we find 19 Canada geese floating merrily together about 40 yards from shore. We sneak up to the side of the pond and catch them off guard when we dash for the shoreline and start banging shots at them as they’re struggling to get airborne. There’s shotfall all around them, as well as beyond them, so we know they’re flying right through our shot string. And yet not one of them goes down.
We’re sure of the range (we looked at the pond from several different angles), so barring the possibility that geese have feathers made of Kevlar, we could only chalk it up to one of 2 things:
1) The performance of the steel shot loads we’re using. I’m loaded with 3” Federal Speed-Shok #2’s, while my cousin is using 3.5” Black Cloud BB’s (the fact that none of them fell to THAT load still blows my mind).
2) Our unfamiliarity with steel shot. My cousin and I have been partridge hunters all our lives, and only recently took up waterfowling. So while we know what we’re doing when it comes to lead shot, steel is quite new to us.
Replaying the whole scenario in my head time and again all week led me to consider both of these possibilities. Would we have had a freezer full of geese if we’d been using tungsten shot instead? Or is the second scenario more likely, that we were making mistakes when shooting, treating steel like it was lead?
Tungsten may be touted by its manufacturers as the ultimate non-toxic projectile, but the down side is readily seen when you go to buy the stuff. For what it costs, the shells should be filled with solid gold shot (which, ironically, is also non-toxic and would perform similarly to lead in terms of ballistics). I went to Coastal the other day to price the stuff after last Sunday’s goose fiasco, and just about hit the floor. The Kent Tungsten Matrix and the Remington Wingmaster HD were similarly priced at roughly $60 for a box of TEN. That’s $6 per bang, so you’d better not miss. Meanwhile, on the very same shelf, I can get a box of 25 Black Cloud for half that price. (Darrell at Coastal told me that they are going to discontinue the tungsten stuff, as it’s just not moving. Small wonder.)
So here are my questions:
• Has anyone else had a similar experience where birds you’re sure you’ve hit have failed to fall to steel shot for whatever reason? Have you had better luck with tungsten? Is it really worth the jaw-dropping price?
• Are there any adjustments you need to make when shooting steel as opposed to lead (in terms of leading the target, elevation, etc) to compensate for the poorer ballistic performance?
Tags:
Christopher I didn't like steel shot at first, but now there are some excellent brands on the market now . you mentioned Black cloud,I tried them and found them to be half decent but they made my gun so dirty I wont use them again. The steel shot I use for hunting ducks is Heavy Steel in three and one half #2 once and one half load 1500 fps.I find I also get real good patterns.Apparently the shot are made af one half tungsten and one half steel, and the price is not too bad 34.95 for a box of25. you can usually get them at Blue Ridge in Lewisporte.
Goose hunting is my passion. I use only the best, a tungsten made by Heavy shot in #2 and #4 in 3 1/2 1 3/4 loads.
These are also usually available at Blue Ridge inc, between 32 to 42 dollars a box for ten depending on the US dollarbecause thats wher they get them. WE have rolled over geese on the bog at 80 paces stone dead with #2heavy shotand countless times have killed them at 50 and 60 yards on the water .As far as I"m concerned its the best shell ever put on the market bar none. When it comes to goose hunting after the investment of time,rec vechile, decoys, etc the price of a box of shells is only a small investment.....you've gone too far to miss
Blue Water Marine & Equipment Ltd.
16 Allston Street
Kenmount Road Business Park
Mount Pearl, NL A1N 0A4
Tel: (709) 782-3200
© 2024 Created by Edward Smith. Powered by